How to Install GPU | Step By Step Guide

By | May 10, 2021
How to Install GPU
How to Install GPU

A GPU is a processor specifically built to perform graphics operations. While GPUs excel at rendering 3D graphics, this involves both 2D and 3D calculations. The primary reason people install a GPU is to play games. Watching a video does not necessitate the use of a dedicated GPU (even razor-sharp HD video). Email, word processing, and other Office suite applications don’t require a dedicated GPU.

A good dedicated GPU is needed for the installation of GPU. You can still build a computer without a graphics card. The graphics card is plugged into a PCI-E port on the motherboard; no other measures are dependent. If you don’t want to install a real GPU, you’ll need a CPU with integrated graphics if you want to use the PC after you’ve installed it.

May You Like: How To Overclock GPU Safely

Some Factors Keep In Your Sweet Memory Before Going To The Installation Of GPU

These are some important critical points to consider before installing a new GPU on your PC. These factors help you to select the new GPU according to your pc and work well.

1. Check The Power Supply According To Powerful GPU

For GPU installation, we need Powerful graphics cards that necessitate a power supply that can keep up with their demands. If you’re using an older power supply or have many other components consuming power,  up to the challenge. If this is the case, try replacing both the power supply and graphics card simultaneously. 

Several websites can assist you in calculating power needs by reviewing any of the hardware you have installed, like GPU or intend to add. Use your search engine to look up the “power supply calculator.” PCI-E connectors are also needed for your power supply. If your power supply is newer, this isn’t normally a problem, but older power supplies can lack the required connectors.

The overall wattage of your power supply should be printed on a sticker next to the power supply. You may have to take the power supply out to find it.

2. Checkup The Motherboard Compatibility

These days, almost all GPUs are PCI-E, so you’ll need to make sure you have at least one of these slots. They are usually found in the row of PCI slots nearest to the CPU. If your motherboard doesn’t have any PCI-E slots, you’ll probably have to buy a new one if you want to update your graphics card.

For installation of GPU, you can find the schematic diagram in the documentation for your motherboard. It will assist you in determining the location of the PCI-E slots. You’ll need to reinstall the operating system after installing a new motherboard. It’s worth noting that most laptops don’t let you update the graphics card.

3. Check The Size Of The GPU

The size of the graphics card you like and whether or not your power supply can accommodate it are the real compatibility problems for installing a GPU. It would be a shame to wait an eternity for Nvidia to restock the RTX 3080s and 3090s, only to find out that they don’t suit your case or won’t run with the rest of your setup. 

Make a list of the vertical and horizontal clearance you have available using a tape measure. Almost all cards will have their dimensions specified on the product page, helping you to double-check. If you’re not sure if they’ll work for you, don’t buy them. 

4. Look For Cards That Have Been Suggested For Your Specific Interests

Different cards excel at being jack-of-all-trades, while most cards excel at being a jack-of-all-trades. Any of the most common cards are listed below for the installation of GPU.

i. The AMD Radeon R7 260X is a budget graphics card that can play most games in medium to high settings. This card is available for less than $120. For $30 more, you can get a similar-performing NVidia GeForce GTX 750 Ti, which uses less power and doesn’t need a PCIe power connector.

ii. NVidia GTX 980 is one of the finest high-end cards on the market right now, capable of doing pretty much anything at 1440p. It also comes at a reasonable price, with the EVGA ACX 2.0 costing about $550 and the classified version costing about $680 to install a new GPU.

May You Like: How To Choose A GPU

How to Install GPU | The Step By Step Guide

One of the simplest steps you can do on a PC is to upgrade your graphics card. Upgrading your GPU is similar to upgrading your RAM in that it often entails removing your old card and upgrading it with a new card for installation of GPU. It’s easy, but we understand that first-time builders will be nervous about installing what is possibly the most costly part of their project. We’ll show you how to mount a graphics card step by step in this guide.

Some Safety Precautions For Yourself

When removing or adding some parts, it’s also a smart idea to take any care. At the very least, this involves unplugging the power cord. Still, we’d also consider using an antistatic wristband, standing on a rubber pad, or at the very least rubbing the metal frame of your case to ensure you’re not carrying any static charge for installation of GPU.

1. Remove The Old Graphics Card

If your PC has an older graphics card, you must uninstall it before installing the latest GPU. If you’re starting from the beginning, skip to the next stage. Remove the power cable(s) first, if there are any. They’ll be at the card’s end, and they’ll usually have a push-pin that you’ll need to apply pressure to unlock.

The screws that tie it to the PCI Express backplate must be removed. Remove those with your fingers (if thumbscrews) or a screwdriver, and set them aside because we’ll use them while downloading the new GPU.

The final move is to remove the clipping process that holds a card in place on most motherboards. It will be at the PCI-e slot end, underneath the card. If you have the chance, take a good look at it, as others would need pushing, and some would need pulling to the left. If your card is blocking your vision, you won’t be able to see it., get a decent feel for it and see if it can be loosened by contact. If you’re unsure, look up the manufacturer of your motherboard online and get a decent idea of what it looks like for installation new GPU.

Remove the card from the PCIe slot with care. Until the clip has been relaxed, a card can get trapped on the PCIe backplate due to how the case is made, so don’t be confused with giving it a little jiggle to free it. When you take the card, make sure you put it somewhere that isn’t electrically conductive. Place it in an antistatic bag if possible.

Remove The Old Graphics Card
Remove The Old Graphics Card

2. Remove PCI-Express Backplate

 Cannot mount a new graphics card without first finding room in the PCIe backing layer. If you replaced the old graphics card first, you do not need to remove an extra backplate for new GPU installation, so if you didn’t — or if the current GPU is bigger than the last — you may need to uninstall an extra backplate or two.

Examine the next graphics card and place it in the PCIe slot to load it (you want the PCIe 16x slot). It’s usually the board’s top slot (if in doubt, consult your motherboard manual or an online resource). Determine how many PCIe slots you’ll need and cut the required amount of PCIe backplates with your fingers or a screwdriver to install GPU.

Put them somewhere safe, and you never know when you’ll need them again. About the fact that most cases have removable PCIe plates, some require you to cut the backing. If this is the case, kindly wiggle the backplate back and forth to split it off. Since you won’t be able to put these back on, double-check if you’re pulling the correct ones for install GPU.

Remove PCI-Express Backplate
Remove PCI-Express Backplate

3. Insert In The New Card

Now that you have enough space for your new graphics card, it’s time to put it in place. The procedure is straightforward, but it can be a little fiddly depending on the size of your PC case and whether or not any parts are in the way. Regardless, will include the graphics card in the PCIe slot for install the GPU. To ensure that the I/O plate on the back of the card slots into the PCIe back plate properly, you will need to come in at a slight angle. Before installing the card, make sure the PCIe clip is open.

The much more significant thing to remember is that installation would not necessitate a lot of force. Maintain a strong but gentle tone. The palm of your hand, right above where the card is slotting into the PCIe slot, is recommended. Wrap your fingertips around the cooler, concentrating the weight on your hand, with your palm on the side of the card for install the GPU.

Take it out to see if it is blocking the PCIe slot if it isn’t slotting in. When the PCIe slot is mounted, you can hear the clip at the end of the PCIe slot click, but this might not be the case on every motherboard.

When you’re finished installing it, make sure to tighten the backplate screws to keep it in place. You can adjust the angle of the screws by shifting the card slightly in its slot if necessary. But don’t place too much pressure on the card. There’s only enough wiggle space on either side of the screw hole for a few millimeters.

Insert In The New Card
Insert In The New Card

4. Connect The Power Cables

Locate the appropriate cables for the job — one or two six-pin or eight-pin PCIe power connectors can be needed. Be sure you have the correct ones, as using the incorrect power cable will cause harm to your components. A 6+2 connector is used for most power supplies for install the GPU.

If your graphics card requires eight-pin support, use the small tab on the two-pin connector to align it with the six-pin before connecting it for install GPU. The clip on the connector should be facing the side of the graphics card with the cooler in most situations.

 A six-pin or eight-pin connector, or a hybrid of the two, is used by almost all graphics cards. However, some of NVidia’s latest RTX 3000-series versions use a 12-pin connector. You’ll need an adapter to convert two eight-pin connectors into a single 12-pin connection for this.

Insert them into the corresponding slots at the end of your installation of the new GPU until you’re sure. You can hear them lock into line, so if you give them a little tug, you should make sure they’re in. They shouldn’t switch if they’re properly plugged in to install the GPU.

Connect The Power Cables
Connect The Power Cables

5. Test It Out To Check The Correct Installation

The true test of any PC hardware upgrade is to see how it performs. Check if you’ve done it correctly so far, then plug in the power cord, the keyboard and mouse, and a single display video cable before bringing your PC back together and plugging everything in. If you do, kudos to you! You’ve upgraded the graphics card to install the new GPU.

You can double-check all the power cords are plugged in. If this is the case, and the card is definitely obtaining electricity, repeat the steps above. Make sure the card is properly inserted on both sides.

If you don’t see any changes or changes, try putting the card into a new PCle slot. However, before you do so, we suggest consulting your motherboard’s manual to ensure you don’t overwhelm it or spark a short. There are some motherboards with several 16x slots, and while you should always use the top region, if you can’t get a signal, you can try a different one. We recommend reading your motherboard’s manual first and foremost, as previously said, for install the GPU.

6. Install The Drivers

While you will be asked if you want to install some extra graphics card management tools, the driver installation process is largely automated. This extra program is voluntary, so it will assist you with keeping your drivers up to date. During the installation of the GPU, the panel would most likely flicker and reset.

Since drivers on a disc are almost invariably out of date by the time they’re bought, you’ll almost certainly be prompted to upgrade them once you’ve installed them.

May You Like: How To Fix GPU Fans Not Spinning


As we noticed, installing a GPU is a simple procedure that only involves three items: a new graphics card, a monitor, and a Phillips-head screwdriver. Before you boot, make sure your computer is turned off and unplugged from the wall. A new install GPU can last at least five years if it comes from a high-end brand, not just a high-end GPU. An Asus GPU, for example, would likely last longer than a gigabyte GPU. 

When it comes to PC games, installing a new powerful GPU will make all the difference. It isn’t a difficult job because you’re not fully replacing a computer. However, for someone who has never opened the side of a PC case before, it cannot be very safe.